Telescopic pole CARBONE -3K
Special KIT Asian Hornet
Discover our new model specially designed to fight the Asian Hornet. This 3K carbon telescopic pole with its control handle, kickstand and camera kit will allow you to destroy nests installed more than 16 m without any difficulty. With the help of a compressor or our Autonomous Kit, you can send the biocide directly into the nests. This telescopic pole differs from the model CARBONE - GLASS by its carbon 3K rigidity, but also by its scalability.. Indeed additional options are available to diversify its capabilities!
Most of the CARBON 3K boom!
Main innovations compared to carbon glass boom :
- Fully carbon 3k so much stiffer !
- The inner clamping rings are protected in a groove. As a result, they are not severed during a too abrupt retreat of the pole.
- Rubber seal between each ring to avoid pinching when the boom folds.
- Dehumidifier attached to the kickstand by two clips for quick assembly / disassembly.
- ¼ turn lathe rings machined with great precision in aeronautical aluminum. Anodized red to improve their visibility in the branches.
- The control handle (powder / air) is positionable at the desired height on the boom.
- The interface handle is scalable. You can easily add our different options according to your needs (Video screen, pneumatic pruning switch, ...)
- Handle and stand are protected by thermo lacquering (powder paint EPOXY baked after application). This surface treatment improves their impact resistance and their service life.
- The removable brass tip allows you to quickly change the hose from powder to liquid. For example, you can switch from an Asian hornet powder configuration to liquid "spray" facades or roofs.
Main innovations compared to carbon glass boom :
- Fully carbon 3k so much stiffer !
- The inner clamping rings are protected in a groove. As a result, they are not severed during a too abrupt retreat of the pole.
- Rubber seal between each ring to avoid pinching when the boom folds.
- Dehumidifier attached to the kickstand by two clips for quick assembly / disassembly.
- ¼ turn lathe rings machined with great precision in aeronautical aluminum. Anodized red to improve their visibility in the branches.
- The control handle (powder / air) is positionable at the desired height on the boom.
- The interface handle is scalable. You can easily add our different options according to your needs (Video screen, pneumatic pruning switch, ...)
- Handle and stand are protected by thermo lacquering (powder paint EPOXY baked after application). This surface treatment improves their impact resistance and their service life.
- The removable brass tip allows you to quickly change the hose from powder to liquid. For example, you can switch from an Asian hornet powder configuration to liquid "spray" facades or roofs.
Principle of operation
The telescopic pole is connected to a compressor or to our AUTONOMOUS KIT which generates pressurized air. This energy is directed towards the powder filled with biocide. By activating the independent pilot valves, the system composed of different pneumatic elements, will mix the biocide with air and the pressure will allow to carry the whole to the end of the pole. The diffusion of the air-biocide mixture is carried out by the sting. By its specific design, it will distribute it within the different layers of the nest.
The telescopic pole is connected to a compressor or to our AUTONOMOUS KIT which generates pressurized air. This energy is directed towards the powder filled with biocide. By activating the independent pilot valves, the system composed of different pneumatic elements, will mix the biocide with air and the pressure will allow to carry the whole to the end of the pole. The diffusion of the air-biocide mixture is carried out by the sting. By its specific design, it will distribute it within the different layers of the nest.
Technical characteristics
- Folded length 2.4 m
- Unfolded length 15.6 m
- 11 carbon tubes of different diameters held by 10 sets of clamping rings
- Weight 5.9 Kg
- Pressure required 6 bar
- Inner pipe, no risk of snagging in the branches
- Folded length 2.4 m
- Unfolded length 15.6 m
- 11 carbon tubes of different diameters held by 10 sets of clamping rings
- Weight 5.9 Kg
- Pressure required 6 bar
- Inner pipe, no risk of snagging in the branches
- Fiabilité
- Technical tips
- Very limited physical impact
- Simplicity of implementation
- Scalability
Principle of operation
The telescopic pole is connected to a compressor or to our AUTONOMOUS KIT which generates pressurized air. This energy is directed towards the powder filled with biocide. By activating the independent pilot valves, the system composed of different pneumatic elements, will mix the biocide with air and the pressure will allow to carry the whole to the end of the pole. The diffusion of the air-biocide mixture is carried out by the sting. By its specific design, it will distribute it within the different layers of the nest.
The telescopic pole is connected to a compressor or to our AUTONOMOUS KIT which generates pressurized air. This energy is directed towards the powder filled with biocide. By activating the independent pilot valves, the system composed of different pneumatic elements, will mix the biocide with air and the pressure will allow to carry the whole to the end of the pole. The diffusion of the air-biocide mixture is carried out by the sting. By its specific design, it will distribute it within the different layers of the nest.
Crutch
Principle of operation
The telescopic pole is connected to a compressor or to our AUTONOMOUS KIT which generates pressurized air. This energy is directed towards the powder filled with biocide. By activating the independent pilot valves, the system composed of different pneumatic elements, will mix the biocide with air and the pressure will allow to carry the whole to the end of the pole. The diffusion of the air-biocide mixture is carried out by the sting. By its specific design, it will distribute it within the different layers of the nest.
The telescopic pole is connected to a compressor or to our AUTONOMOUS KIT which generates pressurized air. This energy is directed towards the powder filled with biocide. By activating the independent pilot valves, the system composed of different pneumatic elements, will mix the biocide with air and the pressure will allow to carry the whole to the end of the pole. The diffusion of the air-biocide mixture is carried out by the sting. By its specific design, it will distribute it within the different layers of the nest.
stainless steel sting
stainless steel sting
Duster modified by us to improve its functioning and to adapt it to the powder of high powder.
- Modification of internal elements to increase the flow.
- Change of the air intake system to allow streaming.
- Modification in 6 bars to reach 30m (guaranteed only with our hoses.)
- Additional confidential technical changes
Composition of KIT CARBON-3K HORNET
The basic KIT for the destruction of Asian hornet nests
Air supply by compressor connection (not supplied) or our standalone kit (available as an option, see below)
- Pole 3K 9 tubing
- Control stand with dehumidifier / regulator filter
- Aiguillon
- 30m of pipe
- DR5 powder modified 6 bars
- KIT SAV (spare connectors)
EN OPTION
Aiguillon destructor
Thanks to its wings, this sting will allow you to destroy the nest without having to fold the pole.
Aiguillon COURbé
Thanks to its wings, this sting will allow you to destroy the nest without having to fold the pole.
destructor
Thanks to its wings, this sting will allow you to destroy the nest without having to fold the pole.
RACLOIR
Thanks to its wings, this sting will allow you to destroy the nest without having to fold the pole.
EXTENSION
Flexible spout for powder coating
Length 54 cm
Reinforced flexible hose with shape memory
Length 54 cm
Reinforced flexible hose with shape memory
EXTENSION
Flexible spout for powder coating
Length 54 cm
Reinforced flexible hose with shape memory
Length 54 cm
Reinforced flexible hose with shape memory
EXTENSION
Flexible spout for powder coating
Length 54 cm
Reinforced flexible hose with shape memory
Length 54 cm
Reinforced flexible hose with shape memory
AUTONOMOUS KIT
With this Standalone Kit, there is no need for a compressor. You can move wherever you want with an air capacity allowing you the destruction of at least 3 nests.
VIDEO KIT
This VIDEO KIT, made of a 7 "screen of a pair of glasses with integrated right eye, a miniature camera, a led lamp and a laser pointer, you will be able to see precisely what is happening at butt the pole.
And all this even more than 30 m !
And all this even more than 30 m !
ROULEX'UP
Need to destroy a nest hanging under a roof overhang? The ROULEX'UP, rolling along the wall will allow you to lengthen the pole without difficulty, without risk of friction and safely.
EXTENSION
Need to go even higher? br /> Thanks to these extensions in 3K carbon you can exceed 30 m!
- Length 1.5 m
- Carbon 3K
- Adaptable to our pole CARBON-3K
- Weight 1 Kg
- Length 1.5 m
- Carbon 3K
- Adaptable to our pole CARBON-3K
- Weight 1 Kg
SARL AIRADIK - La Pause - 12380 Saint-Sernin sur Rance
RCS Millau - Siret 509 388 179 00020 - N° de gestion : 2008 B 70144 - TVA intracommunautaire : FR 68509388179
RCS Millau - Siret 509 388 179 00020 - N° de gestion : 2008 B 70144 - TVA intracommunautaire : FR 68509388179