Telescopic pole AIR-530-15
Special KIT Asian Hornet
The special Asian hornet AIR-530-15 kit with its HI-MOD telescopic carbon pole, once equipped with its stand, will allow you to destroy nests installed at more than 16 m without any difficulty. Using a compressor or our Standalone Kit , in order to put the powder under pressure, you can send the biocidedirectly into the nests. Telescopic carbon pole of 10, 20 and 30 meters.
Featherweight, minimal folded length, exceptional rigidity and still 15m !
We have greatly reworked the design of our pole in order to offer you a product that is light, easy to handle and still very rigid.!
The advantages of the perch AIR-530-15 !
- Light weight, minimal folded length, exceptional rigidity and still 15m!
- 100% in HI-MOD carbon, one of the best compromises between strength, weight and rigidity. This sophisticated blend of high-modulus carbon fibers gives our poles exceptional rigidity. For more information on the rigidity of our poles, go to the dedicated page rigidité.
- The inner clamping rings are protected in a groove. As a result, they are not cut when the pole is folded too suddenly.
- Presence of a rubber seal between each ring to avoid shocks and pinching when folding the pole.
- Clamping rings, new version, machined with great precision from aeronautical aluminum. Red anodized to improve their visibility.
- Inner pipe, no risk of snagging.
- Light weight, minimal folded length, exceptional rigidity and still 15m!
- 100% in HI-MOD carbon, one of the best compromises between strength, weight and rigidity. This sophisticated blend of high-modulus carbon fibers gives our poles exceptional rigidity. For more information on the rigidity of our poles, go to the dedicated page rigidité.
- The inner clamping rings are protected in a groove. As a result, they are not cut when the pole is folded too suddenly.
- Presence of a rubber seal between each ring to avoid shocks and pinching when folding the pole.
- Clamping rings, new version, machined with great precision from aeronautical aluminum. Red anodized to improve their visibility.
- Inner pipe, no risk of snagging.
Principle of operation
The modified DR5 powder snow , filled with biocide, is connected to a compressor or to our KIT AUTONOME in order to build up pressure. By activating the control valve, the system will mix the biocide with the air and the pressure will allow everything to be carried to the end of the pole. The diffusion of the air-biocide mixture is carried out by the needle. By its specific design, it will distribute it inside the different strata of the nest.
The modified DR5 powder snow , filled with biocide, is connected to a compressor or to our KIT AUTONOME in order to build up pressure. By activating the control valve, the system will mix the biocide with the air and the pressure will allow everything to be carried to the end of the pole. The diffusion of the air-biocide mixture is carried out by the needle. By its specific design, it will distribute it inside the different strata of the nest.
Technical characteristics
- Folded length 1.9m
- Unfolded length 15 m
- 11 carbon tubes of different diameters and lengths held by 10 sets of clamping rings
- Weight 4 Kg
- Folded length 1.9m
- Unfolded length 15 m
- 11 carbon tubes of different diameters and lengths held by 10 sets of clamping rings
- Weight 4 Kg
- Reliability
- Tech Tips
- Very limited physical impact
- Simplicity of implementation
CONTROL VALVE
Control valve :
- Stainless steel clips with anti-slip PVC coating
- Quick assembly by simple clips
- 2 Push-in fittings for quick pipe connection
- Stainless steel clips with anti-slip PVC coating
- Quick assembly by simple clips
- 2 Push-in fittings for quick pipe connection
Crutch
Control stand:
- Allows secure support of the pole on the ground during deployment and treatment:
- Avoid resting the carbon tube directly on the ground and damaging it
- Anti-slip safety system: rubber pad for firm ground, tip for soft ground
- Anti-jam system AIRadik included on the stand
- Allows secure support of the pole on the ground during deployment and treatment:
- Avoid resting the carbon tube directly on the ground and damaging it
- Anti-slip safety system: rubber pad for firm ground, tip for soft ground
- Anti-jam system AIRadik included on the stand
stainless steel sting
MODIFIED DR5 DOWDER
Duster modified by us to improve its functioning and to adapt it to the powder of high powder.
- Modification of internal elements to increase the flow.
- Change of the air intake system to allow streaming.
- Modification in 6 bars to reach 30m (guaranteed only with our hoses.)
- Additional confidential technical changes
Composition of KIT AIR-530-15 HORNET
The basic KIT for the destruction of Asian hornet nests
Air supply by compressor connection (not supplied) or our standalone kit (available as an option, see below)
- Pole AIR-530-15
- Threaded brass pole end G1/4
- Crutch
- Control valve
- Sting
- 34m of pipe
- DR5 powder duster modified 6 bars
- SAV KIT (spare connectors)
- Illustrated instructions
Available with or without powder
Test of the AIR-530-15 pole with the anti-jam system option and outer pipe plate by Etienne LGF
OPTIONAL
Anti-jam handle
Composition :
- Double valve aluminum control handle
- DR5 powder duster modified 6 bars and equipped with a dehumidifier filter
- Double connection pipe and specific pneumatic system
- Kit SAV
Unique anti-jam system:
Hardening of the powder, generated by humidity in the air, can cause a blockage of the entire pneumatic treatment circuit.
The powder can be humidified by two factors :
- Ambient air: The powder, not injected into the nest and present in the treatment circuit, absorbs humidity from the ambient air and hardens over time. It is therefore imperative to purge the entire circuit at the end of treatment.
- Compressed air: It is loaded with humidity generated by the compressor, it is therefore imperative to use dry air to supply the treatment system.
In order to limit the jamming of the entire treatment circuit as much as possible, AIRadik has developed a clever anti-jam system which will save you a lot of trouble. This system allows you to work with dry air and drain the entire treatment circuit.
It incorporates:
- a dehumidifier filter which will supply the powder and the entire circuit with dry air
- 2 independent pneumatic circuits that can be controlled by valves:
- dry compressed air + powder for nest treatment
- dry compressed air for emptying the entire system
Composition :
- Double valve aluminum control handle
- DR5 powder duster modified 6 bars and equipped with a dehumidifier filter
- Double connection pipe and specific pneumatic system
- Kit SAV
Unique anti-jam system:
Hardening of the powder, generated by humidity in the air, can cause a blockage of the entire pneumatic treatment circuit.
The powder can be humidified by two factors :
- Ambient air: The powder, not injected into the nest and present in the treatment circuit, absorbs humidity from the ambient air and hardens over time. It is therefore imperative to purge the entire circuit at the end of treatment.
- Compressed air: It is loaded with humidity generated by the compressor, it is therefore imperative to use dry air to supply the treatment system.
In order to limit the jamming of the entire treatment circuit as much as possible, AIRadik has developed a clever anti-jam system which will save you a lot of trouble. This system allows you to work with dry air and drain the entire treatment circuit.
It incorporates:
- a dehumidifier filter which will supply the powder and the entire circuit with dry air
- 2 independent pneumatic circuits that can be controlled by valves:
- dry compressed air + powder for nest treatment
- dry compressed air for emptying the entire system
Sting destructor
Thanks to its wings, this sting will allow you to destroy the nest without having to fold the pole.
Sting HORNET curve
Needle made entirely of stainless steel. Allows treatment in chimneys, certain orifices, etc.
destructor
Thanks to its wings, this sting will allow you to destroy the nest without having to fold the pole.
SCRAPER
Stainless steel. Allows the destruction of nests at the edge of the roof post-treatment.
Sting MINI-FLEX
Flexible needle for powder coating
Length 54 cm
Reinforced flexible hose with shape memory
Length 54 cm
Reinforced flexible hose with shape memory
Exterior pipe
You are more of an outsider!
No worries, with us you have the choice !
No worries, with us you have the choice !
winder
- Facilitates deployment of the pole
- Capacity 40m of Ø8 pipe
- PVC reel
- Powder-coated aluminum support
- Unloaded weight 1.2 Kg
- Quick assembly/disassembly of the dispenser on its support
- Capacity 40m of Ø8 pipe
- PVC reel
- Powder-coated aluminum support
- Unloaded weight 1.2 Kg
- Quick assembly/disassembly of the dispenser on its support
AUTONOMOUS KIT
With this Standalone Kit, there is no need for a compressor. You can move wherever you want with an air capacity allowing you the destruction of at least 3 nests.
VIDEO KIT
This VIDEO KIT, made of a 7 "screen of a pair of glasses with integrated right eye, a miniature camera, a led lamp and a laser pointer, you will be able to see precisely what is happening at butt the pole.
And all this even more than 30 m !
And all this even more than 30 m !
ROULEX'UP
Need to destroy a nest hanging under a roof overhang? The ROULEX'UP, rolling along the wall will allow you to lengthen the pole without difficulty, without risk of friction and safely.
EXTENSION
New extensions AIR-530-3
- Folded length 1.85 m
- Unfolded length 3.25 m
- Extension length 3 m
- Adaptable to our poles AIR-5..
- Weight 1,1 Kg
- Folded length 1.85 m
- Unfolded length 3.25 m
- Extension length 3 m
- Adaptable to our poles AIR-5..
- Weight 1,1 Kg
ROPE GUIDE LE MALIN
...
FIND all the options on the pagedevis
SARL AIRADIK - La Pause - 12380 Saint-Sernin sur Rance
RCS Millau - Siret 509 388 179 00020 - N° de gestion : 2008 B 70144 - TVA intracommunautaire : FR 68509388179
RCS Millau - Siret 509 388 179 00020 - N° de gestion : 2008 B 70144 - TVA intracommunautaire : FR 68509388179