Telescopic pole API-O4013
Ideal for a low-cost start to the business
NEW FEATURES !
Improved handling
- 1,6m folded up to fit into most commercial vehicles
- 13,3m Unfolded
- 3.3 Kg
- 13,3m Unfolded
- 3.3 Kg
This entry-level but high quality pole is the ideal investment for beekeepers or for a business launch at a lower cost. Very light, thanks to the HI-MOD carbon technology, you will be surprised by its maneuverability and ease of use. Its oval tubular design makes it very rigid. For more information on the stiffness of our poles, visit the dedicated page rigidité.
This HI-MOD carbon telescopic pole equipped with its kickstand and control valve, will allow you to destroy nests installed at more than 14 m without any difficulty. Using a compressor or our Standalone Kit, you will be able to send the biocide directly in the nests.
It is also possible to add extensions to exceed 20m !
Telescopic carbon pole of 10, 20 and 30 meters.
This HI-MOD carbon telescopic pole equipped with its kickstand and control valve, will allow you to destroy nests installed at more than 14 m without any difficulty. Using a compressor or our Standalone Kit, you will be able to send the biocide directly in the nests.
It is also possible to add extensions to exceed 20m !
Telescopic carbon pole of 10, 20 and 30 meters.
Video of our PLC model in 15m :
Working principle
The telescopic pole is connected to a compressor or our STANDALONE KIT which generates pressurized air. A direct connection to a pressurized powder is also possible. To effectively exceed 15m we recommend the use of our DR5 Modified Powder 6 Bars. This energy is directed towards the biocide-filled powder. By operating the control valve, the pressure will allow the air-biocide mixture to be carried to the end of the pole. The diffusion of the mixture into the nest is carried out by the stinger. By its specific design, it will distribute it within the different strata.
The telescopic pole is connected to a compressor or our STANDALONE KIT which generates pressurized air. A direct connection to a pressurized powder is also possible. To effectively exceed 15m we recommend the use of our DR5 Modified Powder 6 Bars. This energy is directed towards the biocide-filled powder. By operating the control valve, the pressure will allow the air-biocide mixture to be carried to the end of the pole. The diffusion of the mixture into the nest is carried out by the stinger. By its specific design, it will distribute it within the different strata.
Oval tubular technology
High rigidity for a featherweight !
Tube anti-rotation system.
High rigidity for a featherweight !
Tube anti-rotation system.
Clamping rings
Operable with one hand, these rings allow for easy adjustment ease for high clamping accuracy.
Operable with one hand, these rings allow for easy adjustment ease for high clamping accuracy.
Control valve
Stainless steel clips with anti-slip PVC coating
Quick assembly with simple clips
2 Push-in fittings for quick hose connection
Stainless steel clips with anti-slip PVC coating
Quick assembly with simple clips
2 Push-in fittings for quick hose connection
Crutch
stainless steel sting
Composition of KIT COMPLET FRELON API-O4013
The complet KIT for the destruction of Asian hornet nests
- Carbon pole HI-MOD oval
- Control valve
- Crutch
- Sting
- 34 m of pipe
- After-sales service kit (spare connectors)
- Modified DR5 Powder 6 Bars
- Extension 2.9m carbon telescopic
- Illustrated leaflet
Technical characteristics
Pole :
- Folded length 1,6 m
- Unfolded length 13,3 m
- 12 Carbon Tubes HI-MOD
- Weight 3,3 Kg
Extension :
- 2 Carbon Tubes HI-MOD
- Unfolded length 2,9 m
- Folded length 1,6 m
- Weight 1kg
Pole :
- Folded length 1,6 m
- Unfolded length 13,3 m
- 12 Carbon Tubes HI-MOD
- Weight 3,3 Kg
Extension :
- 2 Carbon Tubes HI-MOD
- Unfolded length 2,9 m
- Folded length 1,6 m
- Weight 1kg
Available with or without powder
Anti-jam handle
Composition :
- Aluminum control handle double valve
- DR5 powder cleaner modified 6 bar and equipped with dehumidifier filter
- Double connection hose and specific pneumatic system
- Kit SAV
Unique anti-jam system :
A hardening of the powder, generated by the humidity in the air, can cause a jam of the entire pneumatic processing circuit.
The powder can be moistened by two factors :
- L'air ambiant : The powder, which is not injected into the nest and is present in the treatment circuit, absorbs moisture from the ambient air and hardens over time. It is therefore imperative to purge the entire circuit at the end of the treatment.
- Compressed air : It is loaded with moisture generated by the compressor, so it is imperative to use dry air to feed the treatment system.
In order to limit the jamming of the entire treatment circuit as much as possible, AIRadik has developed a clever anti-jamming system that will save you a lot of trouble. This system makes it possible to work with dry air and to drain the entire treatment circuit.
Il intègre :
- a dehumidifier filter that will supply the powder and the entire circuit with dry air
- 2 independent pneumatic circuits that can be controlled by valves :
- Dry compressed air + powder for nest treatment
- Dry compressed air for emptying the entire system
Composition :
- Aluminum control handle double valve
- DR5 powder cleaner modified 6 bar and equipped with dehumidifier filter
- Double connection hose and specific pneumatic system
- Kit SAV
Unique anti-jam system :
A hardening of the powder, generated by the humidity in the air, can cause a jam of the entire pneumatic processing circuit.
The powder can be moistened by two factors :
- L'air ambiant : The powder, which is not injected into the nest and is present in the treatment circuit, absorbs moisture from the ambient air and hardens over time. It is therefore imperative to purge the entire circuit at the end of the treatment.
- Compressed air : It is loaded with moisture generated by the compressor, so it is imperative to use dry air to feed the treatment system.
In order to limit the jamming of the entire treatment circuit as much as possible, AIRadik has developed a clever anti-jamming system that will save you a lot of trouble. This system makes it possible to work with dry air and to drain the entire treatment circuit.
Il intègre :
- a dehumidifier filter that will supply the powder and the entire circuit with dry air
- 2 independent pneumatic circuits that can be controlled by valves :
- Dry compressed air + powder for nest treatment
- Dry compressed air for emptying the entire system
MODIFIED DR5 POWDER
Powder modified by us to improve its operation and adapt it to powder spraying at great heights.
- Modifying internals to increase throughput.
- Changing the air inlet system to allow for streaming.
- Modification in 6 bar to reach 30m (guaranteed only with our hoses.)
- Confidential additional technical changes
EXTENSION
Need to go even higher ?
Thanks to these carbon telescopic extensions, you will be able to exceed 20 m !
- Folded length 1.6 m
- Unfolded length 2.9 m
Thanks to these carbon telescopic extensions, you will be able to exceed 20 m !
- Folded length 1.6 m
- Unfolded length 2.9 m
Sting destructor
Thanks to its wings, this sting will allow you to destroy the nest without having to fold the pole.
Hornet sting curve
Stainless steel prickle. Allows treatment in chimneys, some orifices, ...
destructor
Thanks to its fins, this stinger will allow you to destroy the nest. Ideal for those who return to destroy the nest several hours after treatment.
SCRAPER
Made of stainless steel. Allows the destruction of nests at the edge of the roof after treatment.
Sting MINI-FLEX
Flexible spout for powder coating
Length 54 cm
Reinforced flexible hose with shape memory
Length 54 cm
Reinforced flexible hose with shape memory
Exterior pipe
You are more of an outdoor hose !
No worries, with us you have the choice !
No worries, with us you have the choice !
Weeder adapter
Adapt your weeder to all of our poles. Aluminium, G1/4 threaded, Ø25mm, length 80mm.
reel
- Facilitates pole deployment
- Capacity 40m of pipe Ø8
- PVC reel
- Powder-coated aluminium support
- Curb weight 1.2 Kg
- Quick assembly/disassembly of the unwinder on its holder
- Capacity 40m of pipe Ø8
- PVC reel
- Powder-coated aluminium support
- Curb weight 1.2 Kg
- Quick assembly/disassembly of the unwinder on its holder
AUTONOMOUS KIT
With this Standalone Kit, there is no need for a compressor. You can move wherever you want with an air capacity allowing you the destruction of at least 3 nests.
ROPE GROMMET LE MALIN
...
FIND all the options on the page quote
SARL AIRADIK - La Pause - 12380 Saint-Sernin sur Rance
RCS Millau - Siret 509 388 179 00020 - N° de gestion : 2008 B 70144 - TVA intracommunautaire : FR 68509388179
RCS Millau - Siret 509 388 179 00020 - N° de gestion : 2008 B 70144 - TVA intracommunautaire : FR 68509388179